DIY dream catcher kit: safety information

1. Product description

The NoctisCorvus DIY Dream Catcher Kit (reference DREAM2PACK01) is a craft kit for making two decorative dream catchers. Intended use: indoor decoration.

• Components: metal hoops, plastic beads, flexible silicone/textile parts, textile threads and cords, and decorative feathers (natural or synthetic).
• Dimensions: 12.7 × 45 × 0.5 cm. Weight: 57 g.

2. Safety information (GPSR)

3. Use and assembly

• Read these instructions before you start. Check that all parts are complete and undamaged; if any part is damaged, don’t assemble or use it, and ask for a replacement.
• Step-by-step video: see the dream catcher instructions.
• For decorative use only, indoors.
• Do not bite, suck or swallow any components.
• Avoid pulling threads or parts towards your face, and don’t pull the cords too hard.
• No protective equipment is needed; you may wear gloves if you have sensitive skin. Wash your hands after assembly.

4. Care and storage

• Don’t use water or chemicals. Dust with a soft feather duster or a hair dryer on cool, low setting.
• If the feathers lose their shape, comb them gently with your fingers along the fibre.
• Avoid direct sunlight (it can fade threads and feathers); choose a spot with indirect light.
• If the net loosens, carefully adjust the side knots.
• Store in a dry place and avoid prolonged humidity.
• Keep away from heat sources.
• Keep out of reach of young children.

5. First aid

• If swallowed: do not induce vomiting. See a doctor immediately, especially if a bead, small part or metal fragment was swallowed.
• Strangulation or entanglement with cords: remove the item from the neck or body immediately. Get medical help if there is difficulty breathing or pressure marks.
• Eyes: rinse with water for several minutes. See a doctor if irritation persists.
• Skin: wash with soap and water if irritation appears.
• Inhaled dust or fibres: if irritation appears, move to a well-ventilated area.

6. If the product breaks

• Pick up small parts immediately, and keep children and pets away from beads, threads and fragments.
• Do not reuse the dream catcher if the metal hoop has sharp edges.
• Dispose of damaged parts in accordance with local regulations.

7. Disposal and recycling

Dispose of in accordance with local waste regulations and do not release into the environment. Separate the materials where possible:

• Cardboard: paper and cardboard recycling.
• Plastic: plastic recycling, where applicable.
• Metal: metal recycling, where applicable.
• Textiles and feathers: household waste, unless local rules say otherwise.

Manufacturer and EU representative